Posts Tagged 'Google'

AVG Update and Screwing with your Search

I was able to fix most of the search values. Reset default page. Set search bar back to Google. But if I typed in the URL, the search went to AVG.  Argh…

After much searching, found the solution here: http://support.mozilla.org/en-US/questions/810780

Which was in turn found here http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=157513 ,

 

SOLUTION

1) Type in address-bar about:config and press Enter

2) Confirm warning dialog

3) Find keyword.URL (you can use Filter)

4) Change value of keyword.URL to http://www.google.com/search?ie=UTF-8&oe=utf-8&q=

And there you have it, your URL is back.  😉

Advertisements

QR code, Google believes it’s a buffalo. But Google’s wrong!

Google Kills Off Those Little Square Codes You Scan With Your Phone
http://articles.businessinsider.com/2011-03-31/tech/29979593_1_qr-codes-android-nfc-forum

Why Google is completely and moronically wrong….

NFC tech has it’s uses, buy a coke from a vending machine.  Hoorah! But seriously, the appeal of the QR code is the simplicity in use and creation – it’s ubiquitous. 

ANYONE, and I mean ANYONE can create a QR code. Heck, an artist can even paint one on a wall.  If a deli shop wants to, they can create one for their menu. Put them on flyers, and post them around town. It can even be a coupon.

But NFC, where am I going to get a chip.  How am I going to embed that into my resume when I send it off? How is an add in a magazine going to place that NFC chip in the page? How is it not going to be confused by 50 other NFCs in all the other ads?

Seriously, this is a brain fart on the part of Google.  Not to demean NFCs in any way. More tech the better.  And it’s probably just what we need for more advanced transactions. But I view the two technologies as complimentary, rather than exclusive. Both serve different roles and have their advantages.

 
Google Kills Off Those Little Square Codes You Scan With Your Phone

Circles – A Concept of Social Networking

Google just launched it’s Google+ social network. I was very curious, probably more so than the avg person to see their system.  The result was somewhat a “bittersweet” moment for me.  For nearly 5 years I have had a concept for a social networking site. The concept was “Circles”. I even endeavored to register some domains. As you can imagine circle.com and it’s numerous variants are taken.  Even Sircles.com wasn’t available. Up until a few weeks ago the concept was one I still hoped to implement. I’ve been really surprised that it’s taken this long for a company to implement some of the concepts.

That said, there are several aspects to my social network design that have not been implemented in Google+ “Circles”.  So I am sharing them below. Perhaps Google will implement some of them in the near future.

And sure, there is a small part of me that wonders did someone read one of my “suggestions” to Google.  Maybe, if they did, it’d have been nice if they contacted me during development. But I believe it more likely that the Circles concept is just a “common sense” idea that was waiting to happen.  These concepts are what we do day in and day out on a sub-conscious level.  Implementing them into a social networking site isn’t a noteworthy or patentable thing – or at least it shouldn’t be. Rather it’s just an evolutionary process of bringing ourselves into the  digital world. I’ll just be happy to have an alternative to Facebook. An implementation I greatly dislike, I am hopeful that Google implements key components below. If they don’t, they will leave the door open for somebody else to do so. And perhaps it’ll be me.

A significant issue with all current social networks is the “tides”. Flood of information in and out…Circles assist in part with the tide going out, but only in part. It needs to be related to a concentric layer of circles for the individual.  This enables a social network to respond as we do in real life. So far, no social network has realized this elementary concept. That “Ogres are like Onions – they have layers”, and people are like Ogres.

===================================

Congratulations on Google being the first to “get it”. I’ve have the concept of a circle based social network site for approx. 5 years. Even tried registering a variety of names based on “circle”, “sircles”, etc. Had several ideas for commercials as well.

Google’s implementation is a good start, and I figure it’s that…just a start. Well, seeing as I probably won’t be getting my site off the ground I will share some of the concepts I had. I did attempt. Right now, Google’s almost implemented part 1 of my concepts.

I. Circle based grouping, allow for overlap and nesting (ie: sub-groups). Right now I can create “Friends”, but I want to sub-divide friends. “Old College Friends”, “High School Friends”, etc, etc

II. “Ogres are like onions.” – People are like Ogres, we have layers. The biggest failing of most social network sites today is a lack of layers. Right now on Facebook I can read a group, or I can read a whole smackdown of EVERYONE. The end result is that I see a lot of crap from people I don’t care about. And nearly 100% of the time I miss the stuff that’s important to me.

So take the individual and divide them into 10 concentric layers (circles). Now, I take Joe Schmo that I knew from High School and I put him at layer 5. John Doe I just met at a club I put at layer 9, my good friend and drinking buddy Charlie is at level 3. My wife is in circle 1.

– 2A)

Now I define my reading level. If I set it at 4, I will see the posts by my wife and Charlie. But not those of my other associates. However, a few additional options exist in my concept. One is shout-outs, a couple of times a year a person can do a shout-out post (e.g. “I’m getting married!”, “It’s a boy!”, “I just lost my job, got any leads?”). The shout out posts would be readable 2 levels higher. So in this case. Joe Schmo who is in circle 5 shouts out “It’s a boy, 9lbs 4 oz”. I would see this, and be able to congratulate him. Where as most of his posts would pass me by.

If I’ve got one of those friends that is always posting (like 30 times a day, we all have one of them). I can lower the circle level he is in. This provides a stream that is truly relevant to “ME”.

– 2B)

It’s not just individuals which are assigned to a specific circle of ME. Entire groups are set to a level. So I might take everyone at work or church and assign those groups to level 7. Now any individual in that group would be granted level 7 status. But I could still grant an individual a higher status.

– 2C)

Information Access. For each bit of personal info (email, direct msg, phone, address, etc, etc) I would assign it to a circle layer. So someone with layer 7 access could see my email, circle 4 members could see my phone. Where as circle 10 would only see my birthdate mm/dd and only be able to msg.

Furthermore, when I post or upload a photo, I could set a circle layer level. (eg: this post is level 5, so anyone with level 5 access or in a group with level 5 access could view it). This would be on top of making a post or uploading an image to a specific group; which would then only be visible to those group members.

– 2D)

Negative circles. Creation of a circle that overwrites other circles in a given post. For example, I could create a circle “No Mature Content”. In this circle I would add those in my circle who are minors, my mom & dad, and some of my uber-puritan religious friends.

Now when I make a post, and add that negative circle, my post would be viewable by anyone EXCEPT those in any attached negative circle.

III.  Thumbs Up/Down (+/-)

Another way that posts might show up in a stream is if they receive enough thumb’s up. If a post is highly ranked it might be viewed one reading level above it’s normal viewing.  This is nothing new. This concept has existed since BBS days. The only change is the applying the effect to raise or lower a post’s position in an individuals read feed. These aren’t all of the ideas I’ve had. Just thought I’d jot down a number of them.

IV. Break the Box

One of my intentions was to break the “squareness” of the net. The icon/profile pics were going to be circles, not square. We were going to apply a mask over the image so that all a viewer saw was a circle. Furthermore it was going to be modeled after a “coin”; with a heads and tails side. One side would be a profile pic and the other side an avatar. Yes, two profile images. One the actual you and one iconic. Viewer would be able to flip or spin to see the other side. Yes, it is a total gimmick, but it was to help break the square feel.

I also intended to break it further. If you clicked on a circle of a user, it would split into four and then slide away to become the corners of their profile. The result would display their feed, posts, etc.

V. Display of Posts – I envisioned a number of aspects with posts. The ability to post just a subject, which would act as a tweet or microblog. As well as an ability to read differing modes. One could read just the headlines. Essentially having a more twitter feel, but be able to expand those items with full posts. Or one could view in full.

I also felt one should be able to re-share a link. Essentially, it’d be a subject and a link. Twitter does this both well and horribly. Twitter does re-sharing of links amazingly well. But it fails in the actual link implementation. A link should not, IMHO, take up your tweeting space. One should be able to include a msg+link. This little change would do wonders for a microblog service.

 

VI. Ability to save/archive a post as a memory. Could be your own, or one you are tagged in.

 
NON-CIRCLE CONCEPTS:

When I got my iPhone 3G, I had envisioned an app that I called “Forget-Me-Not”. The idea was to have geo-located tasks that were triggered by proximity or departure. (ie: “pick up milk on way home”, an alert would be triggered when leaving your work office and when passing by the grocery store.)  At the time, Apple’s policy of no background apps put this idea on hold. Along with my lack of an Apple computer to develop on. I was quite glad to see Apple’s announcement of a similar feature for iOS5.

To me, Forget-me-not, circles, etc. Are all no brainers.  Things that should have been implemented 2-5 years ago.
————————–

Sad to think these ideas have been sitting in my head festering. Really wish I was a better coder and could have implemented all of this. But maybe that’s a tad insane, if Google is having a challenge. Maybe it really was more than one mediocre programmer could have implemented.

So how to deal with having ideas and not being able to move forward?

If I could sit down with Google’s Eric and Sergey, I would endeavor to convince them of a new strategy. Patent sharing.

So many out there have patent ideas. I’ve got numerous ideas from magnetic firearm holsters to external vehicle airbags. Problem is, that for many $750 for a mere provisional patent is outside our economic abilities.

So imagine if Google, decided to offer a program to help people pursue provisional patents. Google would cover the fee, in return for being listed as co-inventor.  Google would also have the choice to cover conversion into a full patent if they chose to do so. And maybe even an option to pay the inventor $10,000 and to place the idea into public domain.  Google would implement an easy to access patent licensing system. Then split the licensing proceeds 50/50. It’d be interesting to see how much more stuff would enter public domain or be easily licensable.

Google Botches Big

UPDATE:  So I cleared out a conflicted email, which ironically was conflicted on Google tools I never really used. But it may have come down to posting on some Blogger accounts with the same account name.

The next step is uber-intuitive. Google’s addition of YouTube service to Google App accounts is not enabled by default. You must enable it before you can log in. And while Google does have a blog post stating this, it doesn’t provide much info for where to go in order to accomplish this feat.

Log into your Google Apps admin account (or other account with administrative privileges).  Then click on “Organization & Users” <sarcasm>because everybody would think to find the enable services under that heading</sarcasm>.  Next, click on the Services tab to the left of the Users tab. Scroll down, in my case, all the way to the bottom. You will see three YouTube services. Enable these….

You should now be able to use your Google for your domain email accounts to log into YouTube. In my case, I had already de-linked my YouTube account and associated it with a stock Gmail account. So I re-associated it back to my email. I am not entirely sure how the transition will go for you.

Also, my first attempt at association failed. I tried it a second time and succeeded.  I am guessing it was just a matter of latency in processing the service add request; and communicating it to YouTube.

Anyways, it’s nice to sign back in….

🙂

 

*********************************************************************************

Recently, Google chose to migrate it’s google app accounts (ie: google hosted email accounts such as ***@mydomain.com hosted by google) and merge them with their general account system.

But IMHO they failed big time, and should receive a “2010 Award for Biggest Botches”

The problem arises where you have utilized your email address to sign up with another Gmail service (ie: youtube).  So if you created your youtube account using an email address ****@mydomain.com that was hosted by google.  Have fun logging in…

So what is Google’s solution to this problem? Have you create another account. Rather than merging accounts together, or recognizing that to the user it is all the same account, they’ve created quite a nightmare.  This should have been a seamless transition on the part of Google. In fact, there is no reason people on the front end should ever have had an issue.  At worst, we should have encountered an alert that read something to the effect of “This login was established separately from google domains account. Would you like to merge these accounts. Please provide authentication.”

BAM!!!!

Everything gets associated. You can log into Youtube with the same account you’ve been using for years. But nope, that’s not the way it’s done. And trying to understand Google’s cryptic instructions which seem to offer no real solution is always fun.

Google needs to take some time and hire some non-developers. People who can help Google in communicating.

*sighs*

Come on Google, I expect better of you than this. I’ve waited several weeks hoping the matter will improve and am finding that it’s only getting worse.

FAIL


October 2017
M T W T F S S
« Feb    
 1
2345678
9101112131415
16171819202122
23242526272829
3031